Stroke Counters
These are available in 72x72mm size Panel Mounting type Housing. And have an option of 4 digit and 6 digit. |
|
|
Single Preset Counters
These are available in
| a) |
72 x 72 mm panel mounting Housing with option of 4 Digit and 6 Digit with 4 keys for setting |
| b) |
48 x 96 mm Panel mounting Housing with 6 Digit Display and 5 keys keypad for setting.
|
|
|
|
1, 2, Or Multi preset Counters
These are available in 6 Digit 48 x 96 mm x 110mm Panel mounting Housing & have facility of upto 2 O/Ps .It can be potential free C /O Relay contacts or 2 solid state PNP open collector O/P with 100 mA capacity
|
|
|
Preset Counter with Auto Reset facility.
Available in 48 x 96 x 110mm Panel mounting Housing &have facility for Autoreset i.e when the count reaches the set value, the Display instantly becomes “0000000” ,an output is fired andcounting continues again from 000001….onwards.
|
|
|
Counter cum Totaliser
These are available in 6 Digit 48 x 96 x 110mm Panel mounting Housing. A preset value can be set . when the count reaches the Preset count an output is fired and the display resets to 000000, and the next Pulse continues counting from 1 onwards, However in the Back ground the count keeps on incrementing. Without resetting to 000000. This count can be viewed at the Press of a Key on front Panel.
|
|
|
Counter cum Rate Indicator.
These are available in 6 Digit 48 x 96 x 110mm Panel mounting Housing. The incoming Pulses are Displayed on the Count at the same time the Rate at which these Pulses ( Rate per Minute) are coming can also be seen at the Press of a Key.
|
|
|
Length counter using Proximity / Single channel Encoder.
These are available in 6 Digit 48 x 96 x 110mm Panel mounting Housing. It accepts input from PNP Proximity sensor / Rotary Encoder.
It features a settable Scale Factor / Decimal Point. Thus displaying the incoming Pulses directly in terms of absolute Parameters like – mm, Mtrs., KMs, etc.
|
|
|
Flow Totaliser.
These are available in 6 Digit 48 x 96 x 110mm Panel mounting Housing. It accepts input from PNP Proximity sensor / Rotary Encoder.
It features a settable Scale Factor / Decimal Point. Thus displaying the incoming Pulses directly in terms of absolute Parameters like – ml, Ltrs. Etc.
|
|
|
Up- Down counter :
These are available in 6 Digit 48 x 96 x 110mm Panel mounting Housing.
As the name indicates this can be used as Up counter as well as down counter. It accepts input from PNP Proximity sensor / Potential free inputs. It has additional input which decides whether it will up count or Down Count.
If input is absent it will Up count , if present it will down count. |
|
|
WE ALSO HAVE THE OPTION OF VIEWING OF BOTH THE PARAMETERS ( count [6 Digit] & Rate[4Digit]) .SIMULTANEOUSLY USING OUR DUAL DISPLAY COUNTER AVAILABLE IN 96 X 96 X 150 MM. PANEL MOUNTING
OTHERS AS PER REQUIREMENT CAN BE SUPPLIED
|
