|
 |
 |
 |
 |
Encoder Based Length Controllers :
Available in 2 versions viz. 6 Digit 7 segment LED based and 2 Line LCD Based ( CAM Controller).
A) 7 segment Based :
Key Features
Different Versions.
1. Auto reset Facility: As soon as the set Point (2nd set Point in case of 2 Outputs) is reached an relay is energised and when the relay gets OFF the display becomes zero.
2 . Instant AutoReset: As soon as the set Point (2nd set Point in case of 2 Outputs) is reached an relay is energised and display becomes 000000, relay may remain ON further for the set time but counting continues from 000000
3. In case of a Two Output unit.When 1st set Point is reached output gets ON and remains ON when 2nd set Point is reached second Output is made ON and after time of 2nd output is over both the Outputs get OFF and display resets to 000000. Finds applications for Length measurement, Cut to Length controls. positioning requirements.
|
The CAM Controller is a flexible and Powerful controller and can be adapted for many applications.
7 segment Based Length Controller
|
B) LCD Based Controller ( CAM Controller ) :
 This is a highly flexible controller with upto 8 Inputs and 8 Outputs for Logic interface
Accepts Pulses from Encoder, Facility for Marker as well as Limit switch for Homing.
High Counting Speed of over 50KHz.
Facility for settable Multiplication viz. x1, x2, x4
Facility for settable scale factor (0.00001 to 9.99999) and decimal Point.
Alphanumeric LCD Display and keypad makes setting / programming very User Friendly.
Ideal for Multiple setings. Can be used as Programmable Limit Switches,
Housed in Compact size of 72 x 72 x 150mm metal box. Operates on 230 VAC / 110 VAC.
Finds Applications in SPMs, Press Machines, Engineering Industries, Textile Industries, Other Machine tool applications.for length control, Positioning etc.Please send us your applications requirements to enable us give you a suitable proposal Special requirements can also be considered. Encoder Controller is also used for degree display and control display accuracy can be 1,0.1,0.01degree set points at set degree can also be provided. 2 set points in case of 7 seg and upto 8/16 in case of LCD based unit The degree display can be achieved in respect of the PPR of encoder.
|
| |
Key features |
 |
Compact size-72 x144 x150mm(H x W x D). |
|
2 line LCD display & 17 key keypad MMI for easy user interface. |
|
It has std 12 I/Ps & 8 O/Ps for machine logic control. |
|
In addition it accepts input from Encoder / Linear scale – 2channel/4 channel. |
|
Facility for x1, x2, x4. |
|
Settable Scale Factor, decimal point for displaying incoming pulses to real parameters like mm. Mtr. Degree etc. |
|
Operating Voltage -230VAC / 110VAC |
|
Memory Retention Facility for Parameters. |
|
High Measuring Speed of Encoder Pulses( above 50KHz.) |
|
Output Solid State/Potential free.Relay Contacts using external relay card |
|
Specially designed with noise filters |
|
Parameter settings can be password protected. |
|
All Inputs /Outputs are optoisolated. |
|
| |
Applications |
|
cut to length with 1or upto 8 set points |
|
Pipe Bending Controller |
|
Programable Limit Switches. |
|
Back Gauge Controllers |
|
Electronic ‘CAM’ with upto 8 outputs. |
|
|
 |
 |
 |
 |
|
